OTDR (optical time domain refractometer)

• Enhanced support of FTTH to Metro, Core Network
• High Dynamic Range (45dB)
• Short Dead Zone (0.8 m)

OSA (optical spectrum analyzer)

• 1 Ultra high Wavelength Accuracy; ±10 pm (1520 to 1580 nm); ±20 pm (1450 to 1520 nm); ±20 pm (1580 to 1620 nm); ±50 nm (600 to 1700 nm)
• High Wavelength Linearity; ±10 pm (1520 to 1580 nm); ±20 pm (1450 to 1520 nm); ±20 pm (1580 to 1620 nm)
• Wide close-in dynamic range: 70 dB @ ±0.2 nm
• Max input power: +23 dBm per channel; Max safe input power: +27 dBm

OSA (optical spectrum analyzer)

• 1 Ultra high Wavelength Accuracy; ±10 pm (1520 to 1580 nm); ±20 pm (1450 to 1520 nm); ±20 pm (1580 to 1620 nm); ±50 nm (600 to 1700 nm)
• High Wavelength Linearity; ±10 pm (1520 to 1580 nm); ±20 pm (1450 to 1520 nm); ±20 pm (1580 to 1620 nm)
• Wide close-in dynamic range: 70 dB @ ±0.2 nm
• Max input power: +23 dBm per channel; Max safe input power: +27 dBm

Splicer machine

• Dual Independent Splice Protection Heaters
• 5.6” Switchable Color Monitor for Front to Back or Back to Front Operation
• Complete Splice in Less than 40 Seconds

FRAME Controller

• TLS module AQ 2200-136
• ATTH module AQ 2200-311
• OSW module AQ 2200-411
• Interface module AQ2200-201

Optical power meter

• 4 digit, .01dB Display Readout
• .15 dB accuracy, .01 dB linearity
• 73 dB of Measurement Range

Hot Air Oven cum Incubator

• KW/HP 1.5

Manual Ultra-Selective Filters with Narrow Bandwidth

PIN Diode

• 1.5 GHz InGaAs fiber optic photodetector
• 960nm -1700nm

Fabry-Perot Laser Diodes, Pigtailed Butterfly Package

• Center Wavelengths from 1310 to 2000 nm 14-Pin Butterfly Package with Integrated TEC and Thermistor Pigtailed with 1.5 m of SM or PM Fiber

Modulator with Polarizer

• 10GHz Operating range 1525-1605 nm PRBS optical extinction ratio 13 dB

FTTD Erbium Doped Fiber Amplifier

• R/B: downlink Red-Band (1548~1564nm), Uplink Blue-Band (1528~1563nm), C/C: Downlink and uplink are used C-Band (1528~1564nm), L/L Downlink and uplink are used L-Band (1570~1605nm), C/L: downlink use of C-Band, uplink use of L-Band, SCH: single channel or 1~8 continuous ribbon channels (ITU wavelength)
• F05: gain flatness =±0.25dB, F10: gain flatness=±0.5dB, F20: gain flatness=±1.0dB

DPO(Digital Phosphor Oscilloscope)

• Analog bandwidth 2.5 GHz Sample rate 10 GS/s - 40 GS/s Record Length 25M point - 500M point Channel 4

High Bandwidth, Bipolar Photodetector-Amplifier Module

• LOW NOISE - DOWN TO 100fW/vHz
• ULTRA HIGH BANDWIDTH - 1kHz TO 200MHz
• HIGH GAIN - UP TO 1.5V/µW
• SILICON OR InGaAs PINS, OR SILICON AVALANCHE PHOTODIODES

Programmable High Voltage Power Supply For Photodetector Biassing

• VERY LOW NOISE
• SHIELDED METAL CASE

61/2 Digit Multimeter

• 6½ digit resolution
• 10 measurement functions: DC/AC voltage, DC/AC current,
• and 4-wire resistance, diode, continuity, frequency, period
• 1000 V max voltage input, 3 A max current input

Pulse/ pattern Generator

• 400/660 MHz single- or dual-channel pulse data generator 400 MHz, 3.8 V, 50 O into 50 O (81131A) OR 660 MHz, 2.5 V, 50 O into 50 O (81132A)
• Pulse, burst, pattern modes selectable

Optical Spectrometer

• Optical Resolution: 0.18 nm FWHM
• Integration Time: 7.2ms - 5s

FBG Interrogator

• Sampling rate of: 1000 S/s; Dynamic range. 25 dB
• Number of parallel optical channels:04
• Measurement range (1500-1600 nm)
• Communication: Ethernet (RJ45); SCPI8 over TCP/IP

Tunable Optical Filter

• Narrow bandwidth , SM-28 fiber, with Circulator
• Tunning range : ±30 GHz
• Optical isolation> 25dB
• Tunning resolution :2 ppm

Laser Source

• Linewidth < 1 MHz
• Output Power: 40 mW
• Centre wavelength:1550 nm(ITU-T Grid)